background image

49568IN 15946 REV G   

                      © 2007 TOWING PRODUCTS 

 

 

 
 

WARNINGS: 

LOADED BALL HEIGHT SHOULD NEVER BE GREATER THAN UNCOUPLED BALL HEIGHT. Front wheel overload and loss of rear wheel traction can 

result, and can lead to unstable handling, reduced braking ability, and a tendency to "jackknife" when turning and braking at the same time. IF LOADED BALL HEIGHT IS 
GREATER THAN UNCOUPLED HEIGHT, reduce take-up on spring bar chains and re-measure until proper height is obtained. 
 
DO NOT CUT, WELD, OR MODIFY THE CAST BALL MOUNT.

 

 
DO NOT TOW MULTIPLE TRAILERS:

 Do not attempt to tow any type of trailer behind another trailer. Towing multiple trailers may cause severe instability, loss of 

control and/or structural failure, and may result in vehicle accident, property damage and personal injury. Towing multiple trailers is illegal in many jurisdictions. 
 

FRONT-WHEEL-DRIVE VEHICLES: 

DO NOT ATTEMPT TO HOOK-UP OR TOW WITH REAR WHEELS OF TOWING VEHICLE REMOVED. Severe structural damage 

to towing vehicle, hitch, and trailer may result. A towing vehicle/trailer combination cannot be controlled adequately unless the towing vehicle's rear wheels are carrying 
their share of the load. 
 

MAINTENANCE: 

Keep trunnions and sockets in head assembly free of dirt and well lubricated. Excessive wear in this area may indicate overload or inadequate 

lubrication. Some elongation of socket openings "seat in" is normal. 
 
Keep head assembly exterior clean, especially the trunnion sockets. Do not allow dirt or stones to lodge between trunnions and head. 
 
Keep hitch painted to prevent rust and maintain a good appearance. (Do not paint over labels) 
 
AT THE BEGINNING OF EVERY TOWING DAY: 
• 

Add drop of oil at trunnion contact areas with ball mount. 

• 

Clean ball and coupler socket and coat ball lightly with grease. 

• 

Check spring bar chains and U-bolts for wear. Replace before they become worn halfway through. 

• 

Check to see that all bolts are properly tightened and hitch pin and clip are securely in place. 

• 

Check to see that electrical hookups are in working order, and that safety chains are connected. 

 

TOWING TIPS 

DRIVING: Good habits for normal driving need extra emphasis when towing. The additional weight affects acceleration and braking, and extra time should be allowed for 
passing, stopping, and changing lanes. Signal well in advance of a maneuver to let other drivers know your intentions. Severe bumps and badly undulating roads can 
damage your towing vehicle, hitch, and trailer, and should be negotiated at a slow steady speed. IF ANY PART OF YOUR TOWING SYSTEM "BOTTOMS" OUT, OR IF 
YOU SUSPECT DAMAGE MAY HAVE OCCURED IN ANY OTHER WAY, PULL OVER AND MAKE A THOROUGH INSPECTION. CORRECT ANY PROBLEMS 
BEFORE RESUMING TRAVEL. 
 
CHECK YOUR EQUIPMENT: Periodically check the condition of all your towing equipment and keep it in top condition. 
 
TRAILER LOADING: Proper trailer loading is important. Heavy items should be placed close to the floor near the trailer axle.  The load should be balanced side-to-side 
and firmly secured to prevent shifting. Tongue weight should be about 10-15 percent of the gross trailer weight for most trailers. Too low a percentage of tongue weight 
will often produce a tendency to sway.  Excess weight on the tongue can also lead to sway and damage hitch and / or tow vehicle. 
 
SWAY CONTROLS: A sway control can help minimize the affects of sudden maneuvers, wind gusts, and buffeting caused by other vehicles. Use of a sway control is 
recommended for trailers with large surface areas, such as travel trailers. 
 
TIRE INFLATION: Unless specified otherwise by the towing vehicle or trailer manufacturer, tires should be inflated to their maximum recommended pressure. 
 
TOWING VEHICLE AND TRAILER MANUFACTURERS' RECOMMENDATIONS: Review the owners' manuals for your towing vehicle and trailer for specific 
recommendations, capacities, and requirements. 
 
POLE TONGUE TRAILERS: If your trailer has a straight tongue (instead of an A-frame tongue), it will be necessary to use a pole tongue adapter. This adapter attaches 
to the trailer tongue, providing a place to attach the snap up brackets. 
 
PASSENGERS IN TRAILERS: Trailers should NOT be occupied while being towed, under any circumstances. 
 
TRAILER LIGHTS,  TURN SIGNALS, AND ELECTRIC BRAKES: Always hook up trailer lights, turn signals, electric brakes and break-away switch connection (if so 
equipped) even for short trips. 
 
REMOVE HITCH WHEN NOT TOWING: Remove hitch from towing vehicle receiver when not towing, to prevent contamination of head sockets, reduce chance of 
striking hitch on driveway ramps or other objects, and minimize damage in the event of a rear-end collision. 

Cequent Performance Products, Inc.  
47912 Halyard Dr. Suite 100 
Plymouth, Mi. 48170 

TEN YEAR LIMITED WARRANTY 

Cequent Performance Products, Inc. 

warrants its Pro Series Weight Distributing systems from date of purchase against defects in material and workmanship under 

normal use and service, ordinary wear and tear excepted, for 10 years of ownership to the original consumer purchaser. 
 

Cequent Performance Products, Inc. 

will replace FREE OF CHARGE any part which proves defective in material or workmanship when presented to any 

Cequent 

Performance Products, Inc. 

dealer, 

Cequent Performance Products, Inc. 

Warehouse or returned to factory. TRANSPORTATION CHARGES PREPAID, at the address 

below. THIS WARRANTY IS LIMITED TO DEFECTIVE  PARTS  REPLACEMENT  ONLY.  LABOR  CHARGES  AND/OR  DAMAGE INCURRED IN INSTALLATION OR 
REPLACEMENT AS WELL AS INCIDENTAL  AND CONSEQUENTIAL DAMAGES CONNECTED THEREWITH ARE EXCLUDED. 
 
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. 
 
Any damage to the Pro Series Weight Distributing system as a result of misuse, abuse, neglect, accident, improper installation, or any use violative of instructions 
furnished by us, WILL VOID THE WARRANTY. 
 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. In the event of a problem with warranty service or 
performance, you may be able to go to a small claims court, or a federal district court. 

Summary of Contents for 49568

Page 1: ...ted equal to or greater than trailer gross vehicle weight rating GVWR WARNING Raised balls usually have reduced load ratings Ball rating MUST equal or exceed trailer GVWR 4 Attach hitch ball to the ballmount A Standard height hitch balls with 1 1 4 shanks are supplied with lock washers and nuts If you must use a 1 shank ball use the provided 58184 bushing B to reduce hole size in ballmount A to 1 ...

Page 2: ... provided when needed to fill any gap between the Weight Distributing Head shown below and the hitch bar used in the particular application It is easier to install the shim from the top down as shown below In doing so you will encounter one of three scenarios 1 Shim will go all the way down to line up with the bottom hole If this is the case use the entire shim in the gap Note It is conceivable th...

Page 3: ...EMENTS REGARDING WEIGHT DISTRIBUTING HITCHES Do not use sway control with surge brakes Fig 3 SNAP UP HANDLE Fig 4 PLACE CLOSEST LINK ON HOOK 3 Using tongue jack lower coupler onto ball and close coupler latch 4 Insert round end of spring bar into lower socket of the ballmount and push upward Line up notch in spring bar with the tab in the upper socket and push up until seated Rotate the spring bar...

Page 4: ... side to side and firmly secured to prevent shifting Tongue weight should be about 10 15 percent of the gross trailer weight for most trailers Too low a percentage of tongue weight will often produce a tendency to sway Excess weight on the tongue can also lead to sway and damage hitch and or tow vehicle SWAY CONTROLS A sway control can help minimize the affects of sudden maneuvers wind gusts and b...

Reviews: