100001022
Remote Flame Control
The Proflame2 has six (6) flame levels. With the fireplace turned on, and
the flame level at maximum height, press the down arrow key once to
reduce the flame height by one step (Figure 9) until the flame is turned
off.
The up arrow key will increase the flame height each time it is pressed. If
the up arrow key is pressed while the fireplace is on but the flame is off,
the flame will come on in the high position. A single “beep” will confirm
reception of the command.
Room Thermostat (Transmitter Operation)
The remote control transmitter can operate as a room thermostat. The thermostat can be set to a desired
temperature to control the comfort level in a room. To activate this function, press the thermostat key
(Figure 1). The LCD display on the remote control transmitter will change to show that the room thermostat is
“ON” and the set temperature is now displayed (Figure 10). To adjust the set point, press the up or down
arrow keys until the desired set point temperature is displayed on the LCD screen of the remote control
transmitter.
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the flame height in accordance to the difference between the set point
and the room temperatures. As the room temperature gets closer to the set point, the Smart Function will
modulate the flame down. If the room temperature is cool, the Smart Function will modulate the flame up. To
activate this function, press the THERMOSTAT button (Figure 1) until the word “SMART” appears to the right of
the temperature icon (Figure 11). To adjust the set point, press the up or down arrow buttons until the desired
set point temperature is displayed on the LCD screen of the remote control transmitter.
The thermostat key (Figure 1) on the remote handset needs to be held down. Keep it pressed down and
remove one of the three batteries from the remote handset. Simply re-install the battery that was removed
and the feature is activated. Use the same procedure to disable the thermostat function.
Instructions for enabling the Thermostat function for Canadian users.
Flame Off
Flame level 5
Flame level Max
Flame level 1
Figure 9: Flame level control.
Figure 10: Room temperature
control.
Figure 11: Smart flame
control.
Figure 12: Smart flame
function set low.
9
TCWS54D2_181019-20
