2. Attach the Assembled Frame to the Unit
•
Attach the framing kit to the unit.
(Fig. #16).
3. Secure to Existing Framing
•
Bend out the tabs 90 degrees before
inserting the unit into its framed housing
(Fig. #17).
•
Secure the frame assembly to the wood
frame through the tabs.
Adjustable Lintel
4. Install Non-Combustible Board
•
Use drywall screws, #8, to install the
non-combustible board(Fig. #18).
Fig. #16
Fig. #17
Fig. #18
This fireplace may be recessed up to a
maximum depth of 6”, this recess must
be constructed from non combustible
material. The space between the
outside lintels and the firebox must be
completely free of any debris and the
window with trim fitted must be able
to move freely. No building material
is permitted to protrude past the lintel
bars attached to the fireplace under
ANY circumstance.
NON COMBUSTIBLE
BOARD
NON-COMBUSTIBLE
FINISH MATERIAL
Non combustible building
material may not extend
past this point
Area inside Lintel must
remain free of obstructions
Fig. #19
12
TCWS38_D 011214-48
Summary of Contents for TCWS38
Page 43: ...Fig 76 Wiring Diagram 43 TCWS38_D 011214 48 ...
Page 45: ...45 TCWS38_D 011214 48 ...
Page 46: ...46 TCWS38_D 011214 48 ...
Page 47: ......
