background image

WARNING:  If the information in these 
instructions is not followed exactly, a fire 
or explosion may result causing property 
damage, personal injury or death.

FOR YOUR SAFETY

Installation and service must be performed by 
a qualifi ed installer, service agency or the gas 
supplier.

 What To Do If You Smell Gas

• 

Do not try to light any appliance.

• 

Do not touch any electrical switch. 

• 

Do not use any phone in your building.

• 

Immediately call your gas supplier  

 

from a neighbour’s phone. Follow the  

 

gas supplier’s instructions.

• 

If you cannot reach your gas supplier  

 

call the fi re department.

Do not store or use gasoline or other fl ammable 
vapors and liquids in the vicinity of this or any 
other appliance.

This appliance may be installed in  an aftermarket 
permanently located, manufactured home (USA only) 
or mobile home, where not prohibited by local codes.

This appliance is only for use with the type of gas 
indicated on the rating plate. This appliance is not 
convertible for use with other gases, unless a 
certifi ed kit is used.

This appliance is suitable for installation in a 
bedroom or bed sitting room.

MODEL:  TCWS54DST 
SERIES D 
MODULAR DIRECT VENT 
FIREPLACE

TCWS54D 
SEE THRU 

- Version 2

USER MANUAL

160517-16 

 

 

 

                  

    TCWS54DST_Ver2 

 

 

                         5056.425217-A

SERIAL #

Visit www.townandcountryfi replaces.com for the most recent version of this manual

USER INSTRUCTIONS

 INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.

Summary of Contents for TCWS54D

















Reviews: