mbr-36 mbr-42
15
Town Food Service Equipment Company, Inc.
718/388-5650 outside New York State 800/221-5032
7) New spring/magnet assembly installed
9) Mount the safety head and replace the screws
8) Install the new safety head with the new gasket provided.
Clean old gasket material first.
10 ) Carefully thread the brass fitting from the pilot gas line into
the body and tighten using a
1
/
4
”
wrench.
11 ) Thread the thermocouple fitting into the body by hand.
When you can no longer tighten by hand, use a
3
/
8
”
wrench to make snug. A
1
/
4
”
turn after finger tightening is
recommended. Do not overtighten as it will damage the
control. Turn on gas, check for leaks, and relight pilot.