CEM-190327-0496
10
Reset Lock to Factory Default Settings
without a Master Code
Steps
Result
1.
Locate the reset button on the battery holder.
2.
Press and hold the reset button. After approximately 4 seconds, the lock will beep
2 times, and you can release the reset button.
3.
The
green
LED indicator will light up and it will beep 1 time indicating lock is reset.
Lock is reset to Factory Default Settings.
All codes are deleted and Master Code changes to 123456.
Low Battery Warning
When the battery voltage is low, unlocking the lock will display a green LED with an alarm
followed by a red LED, then followed by a yellow LED with an alarm to indicate low power. Batteries should be changed as soon
as this happens.
When locking under low battery voltage condition, the lock will only use the warning sound to indicate low power.
Only 200 operations are allowed under low battery condition - must change batteries to ensure lock operates properly.
