TownSteel e-Elite 4000 Series Programming Manual Download

Page: 10 / 12

CEM-190327-0496

System Settings

Passage Mode

Key Sequence

Notes



After creating a Passage Code, entering it will activate the Passage Mode function.



The lock will remain actively unlocked until the Passage Code or Master Code is entered to deactivate (or Disable) the function.

Dual Verification Mode

Key Sequence

Notes



Dual Verification Mode, when enabled, requires 2 valid credentials to operate the lock.



A credential can be a Master Code, User Code, or Keycard/Fob.



The Factory Default Settings is set to one credential.

Adjust Keypad Sound

Key Sequence

Notes



Disabling the sound only affects general operation, not during programming of the lock.



During programming mode, lock will temporarily re-enable sound.

Summary of Contents for e-Elite 4000 Series













Search results

Summary of Contents for e-Elite 4000 Series

Reviews:

Related manuals for e-Elite 4000 Series

Brands by name

Popular brands

TownSteel e-Elite 4000 Series, Programming Manual

Search results

Summary of Contents for e-Elite 4000 Series

Reviews:

Related manuals for e-Elite 4000 Series

Brands by name

Popular brands