CEM-190327-0496
8
Delete Credentials
Delete User Codes
Key Sequence
For example
, to delete User Code “202020”, assuming the Master Code is “555555”, press:
Delete User Key Cards
Key Sequence
Notes
The Master Code cannot be deleted.
Multiple Keycards/Fobs can be deleted during the same programming sequence (like Additional User Codes Key Sequence).
•
To exit, press the asterisk (
✴
)
or wait until the lock goes into Idle Mode (12 seconds).
Reset Lock to Factory Default Settings
Key Sequence
All credentials will be deleted, and the lock will reset to Factory Default Settings.
Notes
