YW1949
3
Smartphone they must be on the same WiFi connection. You will need your WiFi password. The APP is not compatible with 5G
networks.
Click on the upper left corner of the APP to access the menu. Click on “Gateway Management”> “Add Gateway Box”> “Smart
Gateway”> “Wi-Fi Box”. Your Gateway is plugged in and the LED should be flashing- if flashing click “Next Step” on the APP-
enter WiFi password> “Next Step”- APP will pair with the Gateway. If the Gateway LED is not flashing- Reset the Gateway- use
a small paperclip to press and hold the reset button on the Gateway- Gateway will beep 5 times- release the reset button and in
about 10 seconds the LED will start flashing indicating the Gateway is in search mode. You can now pair with the Gateway.
After the Gateway is paired you can now pair with the lock.
Add a lock- click on the upper left on the APP to access the menu. Click on “Add Network Connected Device”- “Gateway Door
Lock”- the screen will come up to “Add Door Lock”- press the reset button on the back of the battery tray (see page 10)- click
“Add Door Lock”- lock will pair with your Smart Phone and Gateway- name the device in your APP and click “Completed”. The
APP will go back to the home screen.
You can now unlock the lock using the APP.
See the APP for additional features of adding additional Users, codes, etc.
Summary of Contents for e-Secure 5000 RF Series
Page 1: ......