拓陽精密科技
12
contact with the eyes or mouth. Always store it in a clearly marked container and out of the reach
of children,
Model engine fuel is also highly flammable. Keep it away from open flame, excessive
heat, sources of sparks, or anything else which might ignite it
3.
FUEL TANK:
It is suggested to use a 100 cc tank. The installation of the tank should be kept on the same
plane as the engine. The difference between the fuel output port of the tank and the fuel input
port of the carburetor should be kept within
3 cm
(only the carburetor is higher than the fuel
output port of the tank). Excessive drop will reduce the working efficiency of the carburetor and
have adverse effects on the start-up of the engine. In order to ensure clean fuel supply, please
use standard 5 mm silicone tubing and install oil filter correctly. Since the engine itself can
produce enough negative pressure oil absorption, it is recommended that the fuel supply
nozzle should not be pressurized by the muffled exhaust pipe, and the fuel output port of the
tank should be directly connected to the fuel input port of the carburetor.
4.
START-UP POWER SUPPLY:
Summary of Contents for FS-V400A
