A09566
2
1
3
4
5
6
7
8
9
14
15
16
17
12
11
10
13
18
A09563
Pry
A56695
SST
SST
B08601
A56696
−
ENGINE MECHANICAL
PARTIAL ENGINE ASSY (1CD
−
FTV)(From September,
2003)
14
−
7
1CD
−
FTV ENGINE REPAIR MANUAL (RM1046E)
16.
REMOVE CYLINDER HEAD SUB
−
ASSY
(a)
Using several steps, loosen the 18 cylinder head bolts
uniformly in the sequence shown in the illustration. Re-
move the 18 cylinder head bolts and plate washers.
NOTICE:
Removing the bolts in a wrong order could cause warpage
or cracks of the cylinder head.
(b)
Lift the cylinder head from the dowels on the cylinder
block, then place the cylinder head on wooden blocks on
a work bench.
HINT:
To lift the cylinder head, pry between the cylinder head and cyl-
inder block using a screwdriver.
NOTICE:
Be careful not to damage the contact surfaces of the cylin-
der head and cylinder block.
17.
REMOVE OIL PAN SUB
−
ASSY NO.2
(a)
Remove the 16 bolts and 3 nuts.
(b)
Insert the blade of SST between the No. 1 and No. 2 oil
pans, then cut off the applied sealer and remove the No.
2 oil pan.
SST
09032
−
00100
NOTICE:
Be careful not to damage the No. 1 and No. 2 oil pans.
18.
REMOVE OIL STRAINER SUB
−
ASSY
(a)
Remove the 2 bolts and 2 nuts, then remove the oil strain-
er and gasket.