P14681
P22287
SST
0.5 -- 2.5 mm
(0.020 -- 0.098 in.)
A02827
Measuring
Point
Elongated
Thread
--
ENGINE MECHANICAL
CYLINDER HEAD (2RZ--FE)
EM--51
27. IF NECESSARY, REPLACE SPARK PLUG TUBE
GASKETS
(a)
Using a screwdriver, pry out the tube gasket.
(b)
Using SST and a hammer, tap in a new tube gasket as
shown in the illustration.
(c)
28. INSPECT CYLINDER HEAD BOLTS
Using vernier calipers, measure the minimum diameter of the
elongated thread at the measuring point.
Standard outside diameter:
10.76 -- 10.97 mm (0.4236 -- 0.4319 in.)
Minimum outside diameter:
If the diameter is less than minimum, replace the bolt.
CLICK HERE TO VIEW CHAPTER INDEX
Pages From Supplement
SST
09950
--
60010
(09951
--
00260,
09951
-
-
00490,
09952
-
-
06010),
10.40 mm (0.4094 in.)
Apply a light coat of MP grease to the gasket lip.
3RZ-F,3RZ-FE