10 SWITCHES AND LEVERS
en‐20
10.4 Lift lever
(1) Lower
(2) Lift
Lever to lift and lower the forks.
Lower
Push the lever forward
Lift
Pull the lever backward
The lifting speed can be adjusted by the
amount the accelerator pedal is depressed
and the amount the lift lever is pulled back
ward.
The lowering speed can be adjusted only by
the amount the lift lever is pushed forward.
WARNING
•
Always operate the lift lever from a normal seated position.
•
If the OPS is activated, fully release the accelerator pedal, return the lift lever to the neut
ral position and return to the normal seated position to deactivate the OPS. If you return to
the seat while the lift lever is in the lifting position, the OPS will be deactivated and the
forks will start moving 1 second later.
•
After the OPS is activated, if you return to the normal seated position while the lift lever is
in the lowering position, the OPS will not be deactivated and the forks will not move due to
the returntoneutral function. Always return the lift lever to the neutral position before re
turning to the seat when deactivating the OPS.
•
As long as the engine is off, the forks will not lower even if the lever is moved to the lower
ing position. When you sit in the normal seated position and turn the key switch to ON po
sition, you can lower the forks even if the engine is stopped (except trucks with optional
Mini lever or Joy stick).
10.5 Manual lowering valve
(1)
(1) Manual lowering valve
If the key switch cannot be turned on for
whatever reason and the forks cannot be
lowered, loosen the manual lowering valve
located on the oil control valve beneath the
floor board, and move the lift lever to the
lowering position.
NOTICE! Once the forks have been
lowered with the manual lowering valve,
be sure to close and lock the valve.
10.6 Tilt lever
(1) Forward tilt
(2) Backward tilt
Lever to tilt the mast forward and backward.
Forward tilt
Push the lever forward
Backward tilt
Pull the lever backward
The forward or backward tilting speed can be
adjusted by the amount the accelerator pedal
is depressed and the amount the tilt lever is
moved.
WARNING
•
Always operate the tilt lever from a normal seated position.
•
If the OPS is activated, fully release the accelerator pedal, return the tilt lever to the neut
ral position and return to the normal seated position to deactivate the OPS. If you return to
the seat while the tilt lever is operated, the OPS will be deactivated and the forks will start
moving 1 second later.
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...
