10 SWITCHES AND LEVERS
en‐23
LED head lights and front combination light (Option)
(1)
(2)(3)
(1) Head lights
(2) Clearance lights
(3) Turn light
Rear combination light
(1) (2)
(3) (2) (1)
(1) Turn signal lights
(2) Stop/tail lights
(3) Backup (reverse) light
10.10 Key off head light off system (Option)
The following lights will be turned off automatically when turning off the key switch.
▪ Head lights
▪ Clearance lights of the front combination light (Option)
▪ Tail lights of the rear combination light (Option)
10.11 Torque converter interlock function (Option)
If you move the direction control lever to change travel direction (i.e. forward to reverse
direction) while traveling at high speed, this function electrically disengages the drive and sets
the torque converter to neutral. Once the speed drops below the set speed while traveling in
neutral, the travel direction will be automatically switched.
To change travel direction, operate the direction control lever after travel speed is reduced
sufficiently.
Ask the Toyota dealer about changing the speed setting.
CAUTION
•
When the interlock is engaged, release the accelerator pedal and use the brake pedal to
reduce speed. After the truck has stopped moving, slowly press the accelerator pedal
down to start moving again. Disengaging the interlock while the accelerator pedal is
pressed down could result in wheel spin.
•
Do not perform forward or reverse operation on a gradient or incline. If direction control
lever is operated on a down gradient or incline, the torque converter interlock function
may not operate correctly.
10.12 Tilt steering adjust lever
(1) Pulled up
The steering wheel position can be adjusted
back and forth by pulling the tilt steering ad
just lever up.
1.
Pull the tilt steering adjustment lever up.
2.
Adjust the steering wheel to the desired
position.
3.
Lock the steering wheel position by
pushing down the lever.
4.
After adjustment, try to move the steer
ing wheel back and forth to make sure it
is locked.
WARNING
•
Do not adjust the steering wheel position while the truck is moving.
10
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...