10 SWITCHES AND LEVERS
en‐28
10.19.3 Automatic fork leveling switch
(Automatic fork leveling control)
(1)
(1) Automatic fork leveling switch
Forks will automatically stop at the horizontal
position when operating the load handling
lever from the backward to forward position
or from the forward to backward position
while pressing the automatic fork leveling
switch.
It is also possible to slow down the backward
tilting speed at a low lift height by pressing
this switch (At a high lift height, the backward
tilting speed is automatically reduced by the
active mast backward tilt speed control func
tion of SAS).
For details of this function, please refer to the
SAS FUNCTION section of this manual.
10.19.4 Attachment lever
Lever to operate attachments.
Attachment operating speed can be adjusted
by the amount the accelerator pedal is de
pressed and the amount the lever is moved.
WARNING
•
Always operate the attachment lever from a normal seated position.
•
If the OPS is activated, fully release the accelerator pedal, return all levers to the neutral
position and return to the normal seated position to deactivate the OPS.
•
After the OPS is activated, if you return to the normal seated position while the lever(s)
are operated, the OPS will not be deactivated and the forks will not move due to the re
turntoneutral function. Always return all levers to the neutral position before returning to
the seat when deactivating the OPS.
10.20 Arm rest (Mini lever or Joy stick models)
Mini lever
Joy stick
Before starting the engine, adjust the arm
rest to set the optimum driving position.
CAUTION
•
Do not adjust the arm rest position while the truck is moving.
•
After the adjustment of the arm rest position, confirm that the knobs and the lever have
been secured in place. A loose knob or lever may cause an accident.
•
To operate the truck safely, lock the arm rest securely. Before operating the truck, always
confirm that the lever for turning and securing the arm rest is locked.
(1)
(1) Forwardbackward position adjustment
knob
Adjusting the forwardbackward position
1. Pull up and loosen the forwardbackward
position adjustment knob.
2. Adjust the arm rest forwardbackward
position.
3. Then press the knob, securing the arm
rest position in place.
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...
