12 INSTRUMENT
en‐43
NOTICE
•
Press switch (a) for more than 2 seconds to reset the TRIP total travel distance.
12.2.6 Planned maintenance hour meter
MODE
Displays the preset service interval time and
the current elapsed time of the planned main
tenance hour meter.
CURRENT
Displays the current time
SETTING
Displays the preset service inter
val time
The preset interval time can be set between
10 to 2400 hour. 10 to 200 hour setting can
be set in 10 hour intervals, and 200 to 2400
hour setting can be set in 50 hour intervals.
The hour meter integrates the elapsed time
while the key switch is turned on.
It also continues to include the elapsed time
even if it exceeds the preset service interval
time.
NOTICE
•
To change the time setting, ask a supervisor or the Toyota dealer.
12.2.7 Diagnosis indicator
MODE
The diagnosis indicator and the error code
will be displayed when an error is found and
a warning sound will warn the operator.
NOTICE
•
The error code displayed on the screen varies depending on the content of the error.
There are also cases when no error code is displayed.
•
When the diagnosis indicator is displayed, ask the Toyota dealer for an inspection.
12.2.8 Lowspeed setting indicator
MODE
(1) Switch (a)
When low speed settings have been set, the
turtle mark is displayed.
Each time switch (a) is pressed, the turtle in
dicator will blink. When the indicator is dis
played, the low speed setting control is act
ive.
The lowspeed setting value can be set on
the Operator setting menu screen. Refer to
the Operator setting menu screen section of
this manual for details.
12.2.9 Ecomode indicator
MODE
(1) Switch (b)
When the ecomode indicator is displayed,
the ecomode function is active.
Press switch (b) to turn on and off the eco
mode.
12
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...
