18 PLANNED MAINTENANCE
en‐76
18.2.2 Fan and engine ancillary drive belt inspection
1FS (Gasoline) engine
1KD (Diesel) engine
Inspect the fan and engine ancillary drive belt
for cracks, fraying and tension.
If any problem is found, have the belt re
placed or adjusted by the Toyota dealer.
Refer to service data for proper tension.
A
NOTICE! 1KD engine ancillary drive belt is
a ribbed type. The belt tension is automat‐
ically fixed by an auto tensioner. Inspect
the ribbed V belt for cracks, fraying and
the mark of tension adjustment condition.
If the mark is outside of A as the drawing
on the left indicates, the belt replacement
is required.
18.2.3 Battery electrolyte check
(1)
(1) Electrolyte level indicator
1.
Use the electrolyte level indicator to
check the battery condition.
2.
The indicator shows green color if the
electrolyte level is normal, white if the
level is low, and red if the battery needs
to be replaced.
WARNING! See Battery Maintenance
Section of the separate publication,
"Manual for Safe Operation", for im‐
portant rules on batteries. Batteries
can be very dangerous if you do not
follow those rules.
NOTICE! When the indicator shows
red color, ask the Toyota dealer to re‐
place the battery.
18.2.4 Torque converter oil inspection
1.
Park the truck on a safe and level ground with the control lever in the neutral position,
stop the engine, apply the parking brake and the remove the key from the switch.
WARNING! Inspect with the parking brake applied and the forks lowered to the
ground.
2.
Open the engine hood and remove the toe board.
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...
