11 BODY COMPONENTS
en‐34
(1) Hood damper lock
Closing
1. Lift up the engine hood and press the
hood damper lock to release the lock.
2. Close the engine hood gently, and press
down on the hood until you hear a click
ing sound.
3. Return the seat and arm rest to the nor
mal position.
11.6 Draw bar
(1) Draw bar
The draw bar is located at the back of the
counterweight, and is used to pull the truck
should its tires drop into a gutter or become
stuck in mud.
It can also be used for loading the forklift
onto a truck or another truck. The draw bar
should not be used for towing the forklift or
for towing another truck using the forklift.
11.7 Lifting points
(1)
(1) Lifting points
Lifting points are located on the outer mast
and the overhead guard.
WARNING
•
When lifting the truck at lifting points, be sure to use cable that has plenty of strength.
11.8 Overhead guard
When properly maintained, the overhead
guard will help protect the operator from fall
ing objects.
11.9 Load backrest extension
When properly maintained, the load backrest
extension will help stabilize the load and pre
vent parts of a load from falling back into the
operator’s compartment.
11.10 Mast
The mast uses special steel and precision
bearings to make your Toyota lift truck reli
able and economical.
The mast is mounted to the front of the truck.
Hydraulic cylinders are used to tilt the mast
forward and backward. Hydraulic cylinders
and chains are used to raise the carriage and
attachments.
WARNING
•
The mast is designed for lifting loads not people. Do not use your forklift in place of an el
evating work platform.
•
Never place any part of your body in any part of the mast, the carriage or attachment.
Summary of Contents for 40--8FD35N
Page 92: ...19 TRUCK DIMENSIONS en 93 19...
