Product details
Product guide – BT Levio W-series
51
Battery connector and charging
To charge the battery, disconnect the battery connector and connect it to the battery
charger. The battery connector should also be disconnected in the following situa-
tions to cut the power supply:
● In the event of an accident.
● In connection with welding work.
● If the truck will not be used for 3 days.
Feature
The battery connector has an integrated cable
bracket.
Benefit
The cable bracket prevents damage to cable leads
when the battery connector is disconnected.
For further instructions on maintenance of the bat-
tery and charger as well as change of battery, see
Technical information.
Charger
A wide choice of battery chargers is available on the market. These chargers can
largely be divided into two types: Conventional transformer chargers, typically
unregulated, and High Frequency (HF) chargers with regulated operation and thus
a possibility to control the charging process.
The charger must be adapted to the battery. If GEL batteries are used, a regulated
charger suited for GEL battery charging must be used. Additionally, for uninter-
rupted battery warranty cover, battery manufacturers require that a charger ap-
proved by them is used. Lead-acid batteries are not as sensitive in terms of charger
selection.
Summary of Contents for BT Levio LWE140
