background image

Options

Product guide – BT Levio W-series

70

If the shock sensor is included in the system, information about collisions and im-

pacts can be viewed.
By monitoring truck usage and operator performance, customers can improve op-

erations and reduce cost.
Access to different levels of information can be set for different users/functions in 

the company.
Usage hours, error codes and other truck related information can be collected re-

motely for the benefit of the TMHE organisation.

Shock sensor

When T.W.I.S is combined with a shock sensor the following collision data can be 

viewed:

 

● Operator involved in collision

 

● Severity of collision

 

● Error codes generated by the collision

 

● When the collision occurred and for how long the truck had been in use before 

the collision

There are three possible behaviours of the truck when a collision is recorded:

 

● The truck continues to operate as usual

 

● The truck switches to turtle mode; to return to normal operation the truck must 

be restarted

 

● The truck switches to turtle mode; to return to normal operation the truck must 

be restarted with a special ID-key or a special PIN code.

Shock sensitivity and desired behaviour can be set for each individual truck.

NOTE! The shock sensor used for T.W.I.S can also be used as a standalone unit. When used without 

T.W.I.S, the collision and impact information is shown in the display and more detailed information 

can also be viewed by the service engineer via the service key.

Benefit

The shock sensor monitors careless driving behaviour and constitutes a tool to take 

action and improve safety on the site. This will in turn lead to a reduction in dam-

ages on trucks, goods and racking. The shock sensor information can also be used 

to address operator training needs.

Summary of Contents for BT Levio LWE140


















































































Reviews: