Toyota Land Cruiser Station Wagon 2020 Owner'S Manual Download

Page: 231 / 690

LC2MM_OM60T13E_(GE)

20.04.16 09:33

227

3. Media operation

Au
dio/v

isual sy

stem

No.

Function (Audio)

Select to display the audio source se-
lection screen.

Select to select a track.

•

Displays cover art

•

Select to display a track list.
To return to the top screen, select

“Now playing...”

on the list

screen.

Select to display the play mode se-
lection screen.
To return to the top screen, select

“Now playing...”

on the list screen.

Select to display the sound setting
screen.

Select to display the audio settings
screen.

Select to set random playback.

Select to set repeat playback.

Shows progress

Select to play/pause.

•

Turn to adjust volume.

•

Press to turn the audio system on/
off.

•

Press and hold to restart the audio
system.

•

Press to select a track.

•

Press and hold to fast forward/
rewind.

Press to play/pause.

•

Turn to select a track.

•

Turn to move up/down the list.
Also, the knob can be used to
enter selections on the list screens
by pressing it.

No.

Function (Video)

Select to display the audio source se-
lection screen.

Select to display the play mode se-
lection screen.
To return to the top screen, select

“Now playing...”

on the list screen.

Select to display the sound setting
screen.

Shows progress

Select to play/pause.

Select to display the option screen.
(

→

P.229)

Select to fast forward.

Select to rewind.

Select to display full screen video.

•

Turn to adjust volume.

•

Press to turn the audio system on/
off.

•

Press and hold to restart the audio
system.

•

Press to select a file.

•

Press and hold to fast forward/
rewind.

Press to play/pause.

•

Turn to select a file.

•

Turn to move up/down the list.
Also, the knob can be used to
enter selections on the list screens
by pressing it.

Summary of Contents for Land Cruiser Station Wagon 2020



















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Related manuals for Land Cruiser Station Wagon 2020

Brands by name

Popular brands

Toyota Land Cruiser Station Wagon 2020, Owner'S Manual

Search results

Summary of Contents for Land Cruiser Station Wagon 2020

Reviews:

Related manuals for Land Cruiser Station Wagon 2020

Brands by name

Popular brands