16
1
2
3
NOTE
• Confirm that the dashcam power is off (LED is off). Do not insert
a microSD card while the dashcam is running. Otherwise, the
microSD card may get damaged.
• When attaching a microSD card to the microSD card slot cover,
check the direction of the card and then slide it into the gap of the
cover.
• Close the microSD card slot cover securely to make sure that the
microSD card is inserted correctly.
2 Starting
The power of the dashcam is linked to the ignition key of the vehicle.
While the power of the dashcam is off, confirm that the microSD card is
inserted.
Turn on the ignition key or the ignition of the vehicle.
The power turns on, and the REC LED (green) of the dashcam starts
blinking and then turns on. (ERROR LED (yellow) turns off)
When you hear a short and high-tone beep, startup is finished.
NOTE
• Just after formatting the microSD card, the dashcam creates files
that are necessary for recording the videos. Therefore, the time
until completion of the startup becomes longer.
• Recording a video is not ready until startup is done. The dashcam
starts recording just after startup is finished.
• When an abnormal vibration and/or a shock is detected while
the vehicle is parked, the power turns on automatically. Then the
dashcam records the video of surrounding area for approximately
60 seconds. (Parking surveillance function)
When the parking surveillance function is activated, a notification
buzzer of one long high-tone beep and five short high-tone beep
sounds twice at the next ignition ON. However, if the parking
surveillance function is set off, the power does not turn on
automatically.
