manualshive.com logo in svg

Toyota RAV4 2007, Owner'S Manual

The Toyota RAV4 2007 Owner's Manual is a comprehensive guide that provides detailed instructions and valuable information about the features and functions of the vehicle. This essential manual is available for free download at 88.208.23.73:8080, allowing you to conveniently access it anytime, anywhere.

Share
Download
background image

’07 Rav4_U (L/O 0608)

345

2007 RAV4 from July ’06 Prod. (ON42621U)

PRE

−

TOWING  SAFETY  CHECK

!

Check  that  your  vehicle  remains  level
when  a  loaded  or  unloaded  trailer  is
hitched.  Do  not  drive  if  the  vehicle  has
an  abnormal  nose

−

up  or  nose

−

down

condition,  and  check 

for 

improper

tongue  load,  overload,  worn  suspension
or  other  possible  causes.

!

Make  sure  the  trailer  cargo  is  securely
loaded  so  that  it  cannot  shift.

!

Check  that  your  rear  view  mirrors  con-
form  to  any  applicable  federal,  state/
provincial  or  local  regulations.  If  not,
install  the  rear  view  mirrors  required
for  towing  purpose.

TRAILER  TOWING  TIPS

When  towing  a  trailer,  your  vehicle  will
handle  differently  than  when  not  tow-
ing.  The  three  main  causes  of  vehicle

−

trailer  accidents  are  driver  error,  exces-
sive  speed  and  improper  trailer  loading.
Keep  these  in  mind  when  towing:

!

Before  starting  out,  check  operation  of
the  lights  and  all  vehicle

−

trailer  connec-

tions.  After  driving  a  short  distance,
stop  and  recheck  the  lights  and  con-
nections.  Before  actually  towing  a  trail-
er,  practice  turning,  stopping  and  back-
ing  with  a  trailer  in  an  area  away  from
traffic  until  you  learn  the  feel.

!

Because  stopping  distance  may  be  in-
creased, 

vehicle

−

to

−

vehicle 

distance

should  be  increased  when  towing  a
trailer.  For  each  16  km/h  (10  mph)  of
speed,  allow  at  least  one  vehicle  and
trailer  length  between  you  and  the  ve-
hicle  ahead.  Avoid  sudden  braking  as
you  may  skid,  resulting  in  jackknifing
and  loss  of  control.  This  is  especially
true  on  wet  or  slippery  surfaces.

!

Avoid  jerky  starts  or  sudden  accelera-
tion.

!

Avoid  jerky  steering  and  sharp  turns.
The  trailer  could  hit  your  vehicle  in  a
tight  turn.  Slow  down  before  making  a
turn  to  avoid  the  necessity  of  sudden
braking.

!

Backing  with  a  trailer  is  difficult  and
requires  practice.  Grip  the  bottom  of
the  steering  wheel  and  move  your  hand
to  the  left  to  move  the  trailer  to  the
left.  Move  your  hand  to  the  right  to
move  the  trailer  to  the  right.  (This  pro-
cedure  is  generally  opposite  to  that
when  backing  without  a  trailer.)  Also,
just  turn  the  steering  wheel  a  little  at
a  time,  avoiding  sharp  or  prolonged
turning.  Have  someone  guide  you  when
backing  to  reduce  the  risk  of  an  acci-
dent.

!

Remember  that  when  making  a  turn,
the  trailer  wheels  will  be  closer  than
the  vehicle  wheels  to  the  inside  of  the
turn.  Therefore,  compensate  for  this  by
making  a  larger  than  normal  turning
radius  with  your  vehicle.

!

Crosswinds  and  rough  roads  will  ad-
versely  affect  handling  of  your  vehicle
and  trailer,  causing  sway.  Pay  attention
to  the  rear  from  time  to  time  to  pre-
pare  yourself  for  being  passed  by  large
trucks  or  buses,  which  may  cause  your
vehicle  and  trailer  to  sway.  If  swaying
happens,  firmly  grip  the  steering  wheel
and  reduce  speed  immediately  but
gradually.  Never  increase  speed.  Steer
straight  ahead.  If  you  make  no  extreme
correction  with  the  steering  or  brakes,
the  vehicle  and  trailer  will  stabilize.

!

Be  careful  when  passing  other  ve-
hicles.  Passing  requires  considerable
distance.  After  passing  a  vehicle,  do
not  forget  the  length  of  your  trailer  and
be  sure  you  have  plenty  of  room  be-
fore  changing  lanes.

!

In  order  to  maintain  engine  braking  effi-
ciency,  do  not  place  the  transmission
in  “D”.

Summary of Contents for RAV4 2007
































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RAV4 2007

PAC I GM3 Instruction Manual preview
I GM3
Brand: PAC Pages: 15
Porsche 911 GT3 - Owner'S Manual preview
911 GT3 -
Brand: Porsche Pages: 195
IBASE Technology MPT-3000V User Manual preview
MPT-3000V
Brand: IBASE Technology Pages: 100
Modifry Products S2000 Windscreen Camera Mount Quick Start Manual preview
S2000 Windscreen Camera Mount
Brand: Modifry Products Pages: 2
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
S3 Power Sports S3193 Installation Instructions preview
S3193
Brand: S3 Power Sports Pages: 2
Subaru 2004 Impreza OUTBACK SPORT Owner'S Manual preview
2004 Impreza OUTBACK SPORT
Brand: Subaru Pages: 34
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Westfalia 859528 Original Instructions Manual preview
859528
Brand: Westfalia Pages: 10
Kogan CERTA CTCVINCVR14A User Manual preview
CERTA CTCVINCVR14A
Brand: Kogan Pages: 4
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Ford TRANSIT 2015 Quick Reference Manual preview
TRANSIT 2015
Brand: Ford Pages: 8
Curt Group Aries AL235045 Installation Manual preview
Aries AL235045
Brand: Curt Group Pages: 2
Ace K9 HA-2520 Installation Manual preview
HA-2520
Brand: Ace K9 Pages: 14
Buick 2010 Lucerne Owner'S Manual preview
2010 Lucerne
Brand: Buick Pages: 475

Brands by name

Popular brands

Load more brands