Toyota RAV4 2019 Owner'S Manual Download

Page: 63 / 244

2-3. Other settings

Ba
sic function

Select to reset the conditions
which have expired.

Select “OK” after entering the
conditions.

●

For scheduled maintenance infor-

mation, refer to “Scheduled Main-

tenance Guide” or “Owner’s

Manual Supplement”.

●

Depending on driving or road con-

ditions, the actual date and dis-

tance that maintenance should be

performed may differ from the

stored date and distance in the

system.

Dealer information can be regis-
tered in the system. With dealer
information registered, route
guidance to the dealer is avail-
able.

Select “Set Dealer”.

Select the desired item to
search for the location.
(



P.80)



The editing dealer screen
appears after setting the loca-
tion.

Select the desired items to
be edited.

Select to enter the name of a

dealer. (



P.63)

Select to enter the name of a
dealer member. (



P.63)

Select to set the location.
(



P.63)

Select to enter the phone
number. (



P.63)

Select to delete the dealer
information displayed on the
screen.

Select to set the displayed
dealer as a destination.
(



P.87)

Select “Dealer” or “Contact”.

Enter the name and select
“OK”.

Select “Location”.

Scroll the map to the desired
point (



P.72) and select

“Enter”.

Select “Phone #”.

Enter the phone number and
select “OK”.

The security system can be set
to on by entering a security code

Dealer setting

Editing dealer or contact
name

Editing the location

Editing phone number

Setting the valet mode

Summary of Contents for RAV4 2019




















































































































































































































































Search results

Summary of Contents for RAV4 2019

Reviews:

Related manuals for RAV4 2019

Brands by name

Popular brands

Toyota RAV4 2019, Owner'S Manual

Search results

Summary of Contents for RAV4 2019

Reviews:

Related manuals for RAV4 2019

Brands by name

Popular brands