Toyota Tundra guide Manual Download

Page: 271 / 672

271

When the sensor detects an obstacle, the direction of and the approx-
imate distance to the obstacle are displayed and the buzzer sounds.

■

Intuitive parking assist display

Front corner sensor opera-
tion
Rear corner sensor operation
Rear center sensor operation

■

Sensor operation and distance to an obstacle

The system operates when the vehicle approaches an obstacle, as
shown by the following table.

When 2 or more obstacles are detected simultaneously, the buzzer sys-
tem responds to the nearest zone.



Front corner sensors



Rear corner sensors

The distance display and buzzer

2
3

Approximate distance to obstacle

Display and buzzer

2.0 ft. (60 cm) to 1.5 ft. (45 cm)

Intermittent

1.5 ft. (45 cm) to 1.0 ft. (30 cm)

Fast intermittent

Less than 1.0 ft. (30 cm)

Continuously

Approximate distance to obstacle

Display and buzzer

2.8 ft. (85 cm) to 2.0 ft. (60 cm)

Intermittent

2.0 ft. (60 cm) to 1.3 ft. (40 cm)

Fast intermittent

Less than 1.3 ft. (40 cm)

Continuously

Summary of Contents for Tundra guide

































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Tundra guide

Reviews:

Related manuals for Tundra guide

Brands by name

Popular brands

Toyota Tundra guide, Manual

Search results

Summary of Contents for Tundra guide

Reviews:

Related manuals for Tundra guide

Brands by name

Popular brands