Toyota Verso Navi Manual Download

Page: 205 / 264

205

2. DESTINATION SEARCH

VERSO_Navi_EE_16CY (OM64596E)

NAV

IGAT

ION SY

ST
EM

Select

“Enter address”

on the naviga-

tion menu screen.

Select

“Geo-coordinates”

Enter the latitude and longitude.

Select

“OK”

Select

“Calculate route”

Select

“POI”

on the navigation menu

screen.

Enter the POI name and select

“OK”

SEARCHING BY
COORDINATES

Geo coordinates can be entered in
DMS format (Degrees



, Minutes’, Sec-

onds”). Only coordinate values that
can potentially exist are able to be en-
tered. Impossible coordinate values
and their relevant screen buttons will
be dimmed.

INFORMATION

●

If a destination that is not located on a
road is set, the vehicle will be guided to
the point on a road nearest to the desti-
nation.

SEARCHING BY POIs

Search for a destination from POI data-
base in the system.
When the system connected to the in-
ternet, a web search is available.

No.

Function

Page

Select to change the
searching area.

207

Select to narrow down the
POI category.

207

Select to display the list of
previous search word.

208

Summary of Contents for Verso Navi









































































































































































































































































Search results

Summary of Contents for Verso Navi

Reviews:

Related manuals for Verso Navi

Brands by name

Popular brands

Toyota Verso Navi, Manual

Search results

Summary of Contents for Verso Navi

Reviews:

Related manuals for Verso Navi

Brands by name

Popular brands