ENGLISH
,
88
TURNING HEATER OFF
Press ON/OFF button to “OFF” position. ON/OFF button will blink and will go out. The
information display will show current time. Circulation fan and blower motor continue to
run for approx. three (3) minutes to cool down the heater.
NOTE: ON lamp goes out when the fan stops. DO NOT disconnect the plug from the outlet
until the fan stops.
NOTE: When you go out, make sure to switch off.
NOTE: When the heater is not used for a long time, make sure to disconnect the plug from
the outlet.
NOTE: Do not ignite the heater soon after extinguishing. Reignite after the heater cools
down.
HOW TO USE THE OVEN
Set the tray as the accessory into the oven.
The inside temperature of the oven will vary depending on the operating mode of the heater.
When the heater operates in “HIGH” mode, the inside temperature will be approx. 180°C.
When the heater operates in “LOW” mode, the inside temperature will be approx. 100°C.
Use the handle for oven to open and close the oven as it will be hot during the operation
(refer to Section I).
SECTION F:
ROUTINE MAINTENANCE
CAUTION:
Be sure to disconnect heater before performing any checks or cleaning.
CAUTION:
Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE, THE PARTS SHOWN BELOW SHOULD BE CLEANED REGULARLY:
FQ-C70
FQ-S70
Fan cover
Integral fuel
strainer (inside)
Integral fuel
strainer (inside)
Guard
Guard
Fan cover
