49
Chapter 10
Network Security
3 ) The
Operation Succeeded
message will appear on the screen, which means the
selected devices have been successfully added to the whitelist.
• Add unconnected devices
1 ) Click
Add Manually
.
2 ) Enter the
Device Name
and
MAC Address
of the device you want to be allowed
and click
ADD
.
3 ) The
Operation Succeeded
message will appear on the screen, which means the
device has been successfully added to the whitelist.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the
Blacklist
or
Whitelist
.
10 3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
