Archer C20i
AC750 Wireless Dual Band Router
- 12 -
Figure 3-5 Quick Setup
3. Click
Next
, and then
WAN Connection Type
page will appear, shown in Figure 3-6.
Figure 3-6 WAN Connection Type
The router provides
Auto-Detect
function and supports five types of WAN connection:
Dynamic IP
,
Static IP
,
PPPoE/Russian PPPoE
,
L2TP/Russian L2TP
, and
PPTP/Russian PPTP
. It’s
recommended that you make use of the
Auto-Detect
function. If you are sure of what kind of
connection type your ISP provides, you can select the very type and click
Next
to go on configuring.
4. If you select
Auto-Detect
, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
)
Note:
If Auto-Detect fails, you can select the connection type your ISP provides in Figure 3-6, and
follow the configuring procedures below to continue.
1) If the connection type detected is
Dynamic IP
, there will appear the MAC Clone page (as
shown in Figure 3-7). In most cases, there is no need to clone the MAC address. You can
