Archer C20i
AC750 Wireless Dual Band Router
- 51 -
Figure 4-31 WPS
¾
WPS -
Enable or disable the WPS function here.
¾
Current PIN -
The current value of the router's PIN is displayed here.
¾
Restore PIN -
Restore the PIN of the router to its default.
¾
Generate New PIN -
Click this button, and then you can get a new random value for the
router's PIN. You can ensure the network security by generating a new PIN.
¾
Add device -
You can add a new device to the existing network manually by clicking this
button.
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and router using either Push Button Configuration (PBC)
method or PIN method.
)
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Step 1:
Press the
WPS/Reset
button on the back panel of the router, as shown in Figure 4-32.
You can also keep the default WPS status as
Enabled
and click the
Add device
button in
Figure 4-31. Then choose “
Press the button of the new device in two minutes
” and
click
Connect
, shown in Figure 4-33.
