Archer C20i
AC750 Wireless Dual Band Router
- 62 -
¾
Allow Guest To Access My Local Network
- If enabled, guests can communicate with
hosts.
¾
Allow Guest To Access My USB Storage Sharing
- If enabled, guests can access to USB
storage sharing servers.
¾
Guest Network Isolation
-. If enabled, guests are isolated from each other.
¾
Guest Network Bandwidth Control
- If enabled, the Guest Network Bandwidth Control rules
will take effect.
¾
Band Select/Guest Network
– Select the wireless network band (2.4G/5G) and enabled or
disable its Guest Network function.
¾
Network Name
- Enter a value of up to 32 characters. The same Name (SSID) must be
assigned to all wireless devices in your Guest Network.
¾
Max Guest number –
The maximum of guests at the same time,
¾
Security
- You can configure the security of Guest Network here.
¾
Access Time
- During this time the wireless stations could accessing the AP.
)
Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page “Bandwidth Control->Control Settings”.
4.9 DHCP
Figure 4-44 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-44):
DHCP Settings
,
DHCP Clients List
and
Address Reservation
.
Click any of them, and you will be able to
configure the corresponding functions.
4.9.1
DHCP Settings
Choose menu “
DHCP
→
DHCP Settings
”, you can configure the DHCP Server on the page as
shown in Figure 4-45.The router is set up by default as a DHCP (Dynamic Host Configuration
Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to
the router on the LAN.
