53
Chapter 11
Specify Your Network Settings
Method 3 Enter the router’s PIN on your client device
Use this method if your client device asks for the router’s PIN.
1.
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Wireless
>
WPS
page. Select the wireless network 2.4GHz or
5GHz according to your wireless client.
3.
Keep the Router’s PIN status as enabled. Take a note of the Current PIN of the router.
You can also click the
Generate
button to get a new PIN.
4.
On the client device, enter the router’s PIN. (The default PIN is also labeled on the
bottom of the router.)
5.
The WPS LED flashes for about two minutes during the WPS process.
6.
When the WPS LED is on, the client device has successfully connected to the router.
Note:
1. The WPS LED on the router will light on for no more than five minutes if the device has been successfully added to
the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.
11. 5. 3. Schedule Your Wireless Function
You can automatically turn off your wireless network (both 2.4GHz and 5GHz) at time
when you do not need the wireless connection.
1.
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Wireless
>
Wireless Schedule
page.
3.
Toggle on the button to enable the
Wireless Schedule
feature.
