17
Chapter 5
VoIP
5 1 Connecting the Telephone
Connect your telephone to the RJ11 ports on the back panel. Please note that you can
only connect to two ports (one to a Phone 1 and the other to a Phone 2) at most.
5 2 Entering Telephone Information
Before using telephony services, you should first enter your telephone information
provided by your telephony service provider.
Follow the steps below to enter information:
1
Visit
http://tplinkmodem.net
, and log in with the password you set for the router.
2
Go to
Advanced
>
Telephony
>
Telephone Numbers
to open the configuration page.
Click
Add
and you will see the following screen
.
3
Enter the necessary information as required, and click
Save
to make the settings
effective.
Phone Number:
The number you use to dial and answer.
Registrar Address:
Usually a domain name, if not, an IP address.
Authentication ID
and
Password:
Not necessary information, but if you have, fill them in.
Advanced:
Click to have more configuration.
To have more configuration on telephony settings
Click
Advanced
under
Advanced Settings
to configure more telephony settings.
