67
Chapter 10
Customize Your Network Settings
4.
Click
Add
to set the
Wireless Off Time
, and click
Save
to make the settings effective.
Note:
1. Make sure that the time of the router is correct before using this function. For details, refer to
2. The wireless LED will turn off if the corresponding wireless network is disabled.
3. The wireless network will be automatically turned on after the time period you set.
10. 9. Use WPS for Wireless Connection
You can use WPS (Wi-Fi Protected Setup) to add a new wireless device to your existing
network quickly and easily.
Method 1: Use the WPS button
Use this method if your client device has a WPS button.
1.
Press the Wi-Fi/WPS button of the router.
2.
Press the WPS button of the client device directly.
3.
The WPS LED flashes for about 2 minutes during the WPS process.
4.
When the WPS LED is on, the client device has successfully connected to the router.
Method 2: Use the WPS button on the web management page
Use this method if your client device has a WPS button.
1.
Visit
http://tplinkwifi.net
, and log in with the password you set for the router.
2.
Go to
Advanced
>
Wireless
>
WPS
page.
