46
Chapter 9
Network Security
5.
Select a
Service Type
from the drop-down list and the following four boxes will be
automatically filled in. Select
Custom
when your desired service type is not listed,
and enter the information manually.
6.
Specify the IP address(es) that this filtering rule will apply to.
7.
Click
OK
to make the settings effective.
Note: If you want to disable an entry, click the button.
9. 3. Access Control
Access Control is used to block or allow specific client devices to access your network
(via wired or wireless) based on a list of blocked devices (Blacklist) or a list of allowed
devices (Whitelist).
Block or allow specific client devices to access my network (via
wired or wireless).
1.
Visit
http://tplinkwifi.net
, and log in with the password you
set for the router.
2.
Go to
Advanced
>
Security
>
Access Control
and enable
Access Control.
I want to:
How can I
do that?
