JetStream L2 Managed Switch
01
Introduction
Chapter 1 Introduction
1.1 Product Overview
Designed for workgroups and departments, TP-Link JetStream L2 Managed Switch provides wire-
speed performance and abundant L2 management features. It provides a variety of service features
and multiple powerful functions with high security.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions
for a variable scale of networks. ACL, 802.1x and Dynamic ARP Inspection provide robust security
strategies. QoS and IGMP snooping/filtering optimize voice and video application. Link aggregation
(LACP) increases aggregated bandwidth, optimizing the transport of business critical data. SNMP,
RMON, WEB and CLI Log-in bring abundant management policies. TP-Link JetStream L2 Managed
Switch integrates multiple functions with excellent performance, and is friendly to manage, which
can fully meet the need of the users demanding higher networking performance.
T2500G-10MPS/T2600G-28MPS is also a Power Sourcing Equipment (PSE*). All the RJ45 ports on
the switch support Power over Ethernet (PoE*) function, which can automatically detect and supply
power to those powered devices (PDs*) complying with IEEE 802.3af and IEEE 802.3at.
*PSE: a device (switch or hub for instance) that provides power through an Ethernet cable.
*PoE: This technology describes a system to transmit electrical power, along with data, to remote
devices over standard twisted-pair cable in an Ethernet.
*PD: a device powered by a PSE and thus consumes energy. Examples include powering network
cameras, wireless LAN access points, IP telephones, network hubs, embedded computers etc.
1.2 Appearance
■
Front Panel
The front panel of TL-SG5412F is shown as the following figure.
Figure 1-1
Front Panel of TL-SG5412F
LEDs
Console Port
SFP Port
10/100/1000Mbps RJ45 Port
The front panel of T2500G-10TS is shown as the following figure.
Figure 1-2
Front Panel of T2500G-10TS
LEDs
SFP Port
10/100/1000Mbps
RJ45 Port
Console Port
(RJ-45/USB)
