TP-Link JetStream T2600G-28TS User Manual Download

Page: 375 / 1136

User Guide

346

Configuring Layer 2 Multicast

Multicast Filtering Configuration

5.2.2 Binding the Profile to Ports

You can bind the created IGMP profile or MLD profile to ports, and configure the number of

multicast groups a port can join and the overflow action.

Binding the IGMP Profile to Ports

Step 1

configure

Enter global configuration mode.

Step 2

interface {fastEthernet

port

| range fastEthernet

port-list

| gigabitEthernet

port

| range

gigabitEthernet

port-list

| ten-gigabitEthernet

port

| range ten-gigabitEthernet

port-list

port-channel

port-channel-id

| range port-channel

port-channel-list

}

Enter interface configuration mode.

Step 3

ip igmp filter

profile-id

Bind the IGMP profile to the specified ports.

profile-id

: Specify the ID of the profile to be bound. It should be an existing profile.

Step 4

ip igmp snooping max-groups

maxgroup

Configure the maximum number of multicast groups the port can join.

maxgroup

: Specify the maximum number of multicast groups the port can join. Valid values are

from 1 to 1000.

Step 5

ip igmp snooping max-groups action {

drop | replace

}

Specify the action towards the new multicast group when the number of multicast groups the

port joined exceeds the limit.

drop

: Drop all subsequent membership report messages, and the port join no more new

multicast groups.

replace

: Replace the existing multicast group owning the lowest multicast MAC address with

the new multicast group.

Step 6

show ip igmp profile

[

id]

Show the detailed IGMP profile configurations.

show ip igmp snooping interface [fastEthernet

[

port-list ]

| gigabitEthernet

[

port-list ]

| ten-

gigabitEthernet

[

port-list ]

| port-channel

[

port-channel-list ]

] max-groups

Show the multicast group limitation on the specified port(s) or of all the ports.

Step 7

end

Return to privileged EXEC mode.

Step 8

copy running-config startup-config

Save the settings in the configuration file.

Summary of Contents for JetStream T2600G-28TS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for JetStream T2600G-28TS

Reviews:

Related manuals for JetStream T2600G-28TS

Brands by name

Popular brands

TP-Link JetStream T2600G-28TS, User Manual

Search results

Summary of Contents for JetStream T2600G-28TS

Reviews:

Related manuals for JetStream T2600G-28TS

Brands by name

Popular brands