T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
153
Parameter
unit-id
—— Specify the unit in the stack whose startup configuration file would
be saved as the backup configuration file. If not specified, current startup
configuration files of all the members in the stack will be saved as their backup
configuration files.
Command Mode
Privileged EXEC Mode
Example
Save all the member’s startup configuration files as the backup configuration
files in the stack:
T2700G-28TQ#copy startup-config backup-config
boot application
Description
The
boot application
command is used to configure the image file as startup
image or backup image.
Syntax
boot application filename
{ image1 | image 2 } { startup | backup } [
unitid
]
no boot application
Parameter
image1 | image2 —— Specify the image file to be configured. By default, the
image1.bin is the startup image and the image2.bin is the backup image.
startup | backup —— Specify the property of the image, either startup image or
backup image.
unitid
—— Specify the unit in the stack whose image file would be configured. If
not specified, image files of all the members in the stack will be configured.
Command Mode
Global Configuration Mode
Example
Configure the image2.bin as the startup image in all the switches in the stack:
T2700G-28TQ(config)#
boot application filename
image2 startup