T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
172
Command Mode
Global Configuration Mode
User Guidelines
Command in the
Interface Range fastEthernet
Mode is executed
independently on all ports in the range. It does not effect the execution on the
other ports at all if the command results in an error on one port.
Example
T2700G-28TQ doesn’t have any fastEthernet port.
interface gigabitEthernet
Description
The
interface gigabitEthernet
command is used to enter the interface
gigabitEthernet Configuration Mode and configure the corresponding Gigabit
Ethernet port.
Syntax
interface gigabitEthernet
port
Parameter
port
—— The Fast/Gigabit Ethernet port number.
Command Mode
Global Configuration Mode
Example
To enter the Interface gigabitEthernet Configuration Mode and configure Gigabit
Ethernet port 20:
T2700G-28TQ(config)#interface gigabitEthernet
1/0/20
interface range gigabitEthernet
Description
The
interface range gigabitEthernet
command is used to enter the interface
range gigabitEthernet Configuration Mode and configure multiple Gigabit
Ethernet ports at the same time.