T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
213
Example
Edit the actions for policy1. For the data packets matching ACL 1200 in the
policy, if the rate beyond 1000kbps, they will be discarded by the switch:
T2700G-28TQ(config)#access-list policy action
policy1 1200
T2700G-28TQ(config-action)#s-condition rate
1000
osd
discard
s-mirror
Description
The
s-mirror
command is used to configure Stream Mirror function of policy
action to the specified port.
Syntax
s-mirror interface
{
fastEthernet
port
|
gigabitEthernet
port
|
ten-gigabitEthernet
port
}
Parameter
port
—— The Mirror Port number of Stream Mirror.
Command Mode
Action Configuration Mode
Example
Edit the actions for policy1. Specify the mirror port as Gigabit Ethernet port 1/0/2
for the data packets matching ACL 1200:
T2700G-28TQ(config)#access-list policy action
policy1 1200
T2700G-28TQ(config-action)#s-mirror interface gigabitEthernet
1/0/2
qos-remark
Description
The
qos-remark
command is used to configure QoS function of policy action.
Syntax
qos-remark dscp
dscp
priority
priority
no qos-remark
Parameter
dscp
—— DSCP of QoS Remark. Specify the DSCP region for the data packets
matching the corresponding ACL. DSCP ranges from 0 to 63. By default, it is not
limited.