T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
240
member-time
—— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 260.
leave-time
—— Leave Time, which is the interval between the switch receiving
a leave message from a host and the switch removing the host from the
multicast groups. Leave Time ranges from 1 to 30 in seconds. By default, it is 1.
port
—— Static Router Port, which is mainly used in the network with stable
topology.
Command Mode
Global Configuration Mode
Example
Enable Multicast VLAN 3, and configure Router Port Time as 100 seconds:
T2700G-28TQ(config)#ip igmp snooping multi-vlan-config
3
rtime
100
ip igmp snooping querier vlan
Description
The
ip igmp snooping querier vlan
command is used to enable the IGMP
Snooping Querier function of the VLAN(s). To disable the IGMP Snooping
Querier function of certain VLANs, please use
no ip igmp snooping querier
vlan
command.
Syntax
ip igmp snooping querier vlan
vlan-id
no ip igmp snooping querier
vlan
vlan-id
Parameter
vlan-id
— VLAN ID, ranging from 1 to 4094.
Command Mode
Global Configuration Mode
Example
Enable the IGMP Snooping Querier function of VLAN1:
T2700G-28TQ(config)#ip igmp snooping querier vlan
1