T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
251
encrypt-pwd
—— Privacy Password, ranging from 1 to 16 characters. The
question marks and spaces are not allowed. This password in the configuration
file will be displayed in the symmetric encrypted form.
Command Mode
Global Configuration Mode
Example
Add Local User admin to Group group2, and configure the Security Model of the
user as v3, the Security Level of the group as authPriv, the Authentication Mode
of the user as MD5, the Authentication Password as 11111, the Privacy Mode as
DES, and the Privacy Password as 22222:
T2700G-28TQ(config)#snmp-server user
admin local group2
smode
v3
slev
authPriv
cmode
MD5
cpwd
11111
emode
DES
epwd
22222
snmp-server community
Description
The
snmp-server
community
command is used to add Community. To delete
the corresponding Community, please use
no snmp-server
community
command. SNMP v1 and SNMP v2c adopt community name authentication.
The community name can limit access to the SNMP agent from SNMP network
management station, functioning as a password.
Syntax
snmp-server
community
name
{ read-only | read-write } [
mib-view
]
no snmp-server community
name
Parameter
name
—— Community Name, ranging from 1 to 16 characters.
read-only | read-write —— The access rights of the community, with “read-only”
and “read-write” options.
mib-view
—— The MIB View for the community to access. By default, it is
viewDefault.
Command Mode
Global Configuration Mode
Example
Add community public, and the community has read-write management right to
View viewDefault: