T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
253
terminate resending the inform request if the resending times reach the
specified Retry times.
timeout
—— The maximum time for the switch to wait for the response from the
management station before resending a request, ranging from 1 to 3600 in
seconds.
Command Mode
Global Configuration Mode
Example
Add a Notification entry, and configure the IP address of the management Host
as 192.168.0.146, the UDP port as 162, the User name of the management
station as admin, the Security Model of the management station as v2c, the type
of the notifications as inform, the maximum time for the switch to wait as 1000
seconds, and the retries time as 100:
T2700G-28TQ(config)#snmp-server host
192.168.0.146 162 admin
smode
v2c
type
inform
retries
100
timeout
1000
snmp-server engineID
Description
The
snmp-server engineID
command is used to configure the local and remote
engineID of the switch. To restore to the default setting, please use
no
snmp-server engineID
command.
Syntax
snmp-server engineID
{ [
local
l
ocal-engineID
] [
remote
remote-engineID
] }
no snmp-server engineID
Parameter
local
—— Local Engine ID for local clients. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the switch. Its length
ranges from 10 to 64 hexadecimal characters, which must be even number
meanwhile.
remote
—— Remote Engine ID for the switch. The Engine ID is a unique
alphanumeric string used to identify the SNMP engine on the remote device
which receives informs from the switch. Its length ranges from 10 to 64
hexadecimal characters, which must be even number meanwhile.