T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
299
Parameter
network-address
—— Specify the network address of the pool, with the format
A.B.C.D. All the IP addresses in the same subnet are allocatable except the
reserved addresses and specific addresses.
subnet-mask
—— Specify the subnet mask of the pool, with the format A.B.C.D.
Command Mode
DHCP Configuration Mode
Example
Specify the address pool “product” as 192.168.1.0 255.255.255.0:
T2700G-28TQ(config)# ip dhcp server pool
product
T2700G-28TQ(config-dhcp)# network
192.168.1.0 255.255.255.0
lease
Description
The
lease
command is used to specify the lease time of the address pool.
Syntax
lease
lease-time
Parameter
lease-time
—— Specify the lease time of the pool, ranging from 1 to 2880
minutes. The default value is 120 minutes.
Command Mode
DHCP Configuration Mode
Example
Specify the lease time of address pool “product” as 10 minutes:
T2700G-28TQ(config)# ip dhcp server pool
product
T2700G-28TQ(config-dhcp)# lease
10
address hardware-address
Description
The
address hardware-address
command is used to reserve the static
address bound with hardware address in the address pool. To delete the binding,
please use
no address hardware-address
.