T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
12
2. You are prompted to enter the connection password
456
you have set through Console port
connection, and then you are in User EXEC Mode.
Figure 1-14 Enter into the User EXEC Mode
3. When entering
enable
command to access Privileged EXEC Mode, you are required to give
the password
123
you have set through Console port connection.
Figure 1-15 Enter into the Privileged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to
Chapter 12 User Manage Commands
for detailed commands information of the
Telnet connection configuration.