T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
338
Parameter
interval
—— Specify the interval of join/prune packet. It ranges from 1 to 18724
seconds. The default value is 60 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the interval of join/prune packet as100s on vlan interface 2:
T2700G-28TQ(config)# interface vlan
2
T2700G-28TQ(config-if)# ip pim join-prune-interval
100
ip pim query-interval
Description
The
ip pim query-interval
command is used to configure the interval of Hello
packet. To restore to the default value of Hello packet interval, please use
no ip
pim query-interval
command.
Syntax
ip pim query-interval
interval
no ip pim query-interval
Parameter
interval
—— Specify the interval of Hello packet. It ranges from 1 to 18725
seconds, and the default is 30 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the interval of Hello packet of 100s on VLAN interface 2:
T2700G-28TQ(config)# interface vlan
2
T2700G-28TQ(config-if)# ip pim query-interval
100