T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
19
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Mode
Accessing Path
Prompt
Logout or Access the
next mode
User EXEC
Mode
Primary mode once it is
connected with the switch.
T2700G-28TQ>
Use the
exit
command to
disconnect the switch
(except that the switch is
connected through the
Console port).
Use the
enable
command
to access Privileged EXEC
mode.
Privileged
EXEC Mode
Use the
enable
command to
enter this mode from User
EXEC mode.
T2700G-28TQ#
Enter the
disable
or
exit
command to return to User
EXEC mode.
Enter
configure
command
to access Global
Configuration mode.
Global
Configuration
Mode
Use the
configure
command to
enter this mode from Privileged
EXEC mode.
T2700G-28TQ(config)#
Use the
exit
or the
end
command or press
Ctrl+Z
to return to Privileged
EXEC mode.
Use the
interface
gigabitEthernet
port
or
interface
range
gigabitEthernet
port-list
command to access
interface Configuration
mode.
Use the
vlan
vlan-list
to
access VLAN
Configuration mode.
Line
Configuration
Mode
Use the
line vty
command
from Global Configuration
mode to specify a line.
T2700G-28TQ(config- line)
Use the
exit
command to
exit to the global
configuration mode.
Press
Ctrl-Z
or enter
end
to return to priviledged
EXEC mode.
VLAN
Configuration
Mode
Use the
vlan
vlan-list
command to enter this mode
from Global Configuration
mode.
T2700G-28TQ(config- vlan)#
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or the
#
command to return to
Global configuration mode.
Router
Configuration
Mode
Use the
router ospf
process-id
to enter OSPF Router mode
from Global Configuration
mode.
Use the
router rip
command to
enter RIP Router mode from
Global Configuration mode.
T2700-28TQ(config- router)
Use the
end
command or
press
Ctrl+Z
to return to
Privileged EXEC mode.
Enter the
exit
or
the
#
command to return to
Global Configuration
mode.