T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
72
T2700G-28TQ(config)#interface range gigabitEthernet
1/0/2-4
T2700G-28TQ(config-if-range)#channel-group
1
mode
on
port-channel load-balance
Description
The
port-channel load-balance
command is used to configure the Aggregate
Arithmetic for LAG. To return to the default configurations, please use
no
port-channel load-balance
command.
Syntax
port-channel load-balance
{src-dst-mac | src-dst-ip}
no port-channel load-balance
Parameter
src-dst-mac —— The source and destination MAC address. When this option is
selected, the Aggregate Arithmetic will be based on the source and destination
MAC addresses of the packets. The Aggregate Arithmetic for LAG is
“src-dst-mac” by default.
src-dst-ip —— The source and destination IP address. When this option is
selected, the Aggregate Arithmetic will be based on the source and destination
IP addresses of the packets.
Command Mode
Global Configuration Mode
Example
Configure the Aggregate Arithmetic for LAG as “src-dst-mac”:
T2700G-28TQ(config)#port-channel load-balance
src-dst-mac
lacp system-priority
Description
The
lacp system-priority
command is used to configure the LACP system
priority globally. To return to the default configurations, please use
no lacp
system-priority
command.