T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
79
Command Mode
Global Configuration Mode
Example
Configure that only the user with the IP address 192.168.0.148 is allowed to
login:
T2700G-28TQ(config)#user access-control ip-based
192.168.0.148
255.255.255.255
user access-control mac-based
Description
The
user access-control mac-based
command is used to limit the MAC
address of the users for login. Only the user with this MAC Address you set here
is allowed to login. To cancel the user access limit, please use
no user
access-control
command.
Syntax
user access-control
mac-based
mac-addr
no user access-control
Parameter
mac-addr
—— The source MAC address. Only the user with this MAC Address
is allowed to login.
Command Mode
Global Configuration Mode
Example
Configure that only the user with the MAC address 00:00:13:0A:00:01 is allowed
to login:
T2700G-28TQ(config)#user access-control mac-based
00:00:13:0A:00:01