Kasa Cam Outdoor Extension Cable
www.kasasmart.com
Let’s get started with your Kasa Cam Outdoor Extension Cable.
Open the weatherproof case and
place the power adapter inside.
Close the case and ensure it’s
latched to keep water out.
Put Into the Case
STEP 2
Connect the Cord
Press down on the latch to
remove the plug adapter and slide
the extension cord into position.
STEP 1
Get Your Tools Ready
You'll need a Philips screw driver to
secure the wall mount. Other tools
will vary based on wall materials.
Before You Start
Notes:
1. If you don't need wall anchors, use a 3/32-inch drill bit .
2. If you're using the provided anchors, use a 7/32-inch drill bit.
3. If you need to route the USB cable through a wall, use a 7/8-inch
drill bit, and caulk or sealant is necessary for an exterior wall.
